With spring coming, you might be tempted to update your decor. This no-sew table runner is a great way to add a pop of color and style to any room, and you can whip one up in 20 minutes or less, and make it without a sewing machine!

20 Minute no-sew table runner tutorial
This table runner is so simple to make, and you only need a few inexpensive supplies:
Fabric (home-decor weight)
Coordinating Fringe-trim
Thermoweb Fabric Fuse™ Liquid Adhesive
Iron and Ironing Board
Rotary Cutter, ruler, and mat
Measuring tape

supplies for table runner

Measure your table. You’ll want your fabric to be between 2/3-1/2 the width of the coffee table, and about 4″ less than the length. Cut the fabric to size.

cut fabric to size

Place the fabric wrong-side-up on the ironing board. Starting with the short sides, press the fabric over 1/2″. Repeat with the other two sides.

press in half inch

Run a line of Fabric Fuse Liquid Adhesive along the edge, about 1/4″ away from the fold.

run line of glue

Finger-press the fabric down, then press with the iron. The weight of the iron will help spread out and distribute the glue. The heat of the iron will help to set the glue faster.

press down glue

Flip over the table runner. Lay the trim on top, along one of the short edges. Cut the trim to the appropriate length.

cut trim to length

Use Fabric Fuse to secure the trim in place.

glue down trim

Repeat with trim on the other side. Allow glue to dry. Your table runner is complete!

finished table runner

thermoweb-no-sew-table-runn

This table runner is so simple to make, you can change it out on a whim, with the seasons, or whenever your room needs a new pop of color.

2 Comments on 20 Minute Fabric Fuse No-Sew Table Runner

  1. Stella
    February 16, 2016 at 9:18 am (8 years ago)

    The definitely looks quick and easy. I can envision quick table settings for parties too. I’m going to buy a tube of this as soon as possible. Thank you for sharing.

1Pingbacks & Trackbacks on 20 Minute Fabric Fuse No-Sew Table Runner