I love quick and simple decor projects! Spend one afternoon and you’ll have a super cute pumpkin banner! Make it Halloweenish by adding fun pumpkin faces or keep it simple to use through Thanksgiving time!

IMG_0701

Colorful Fabric Fall Pumpkin Banner

Materials + Supplies

1 package StitchnSew Quilt Block Sheets
1 ½ yards StitchnSew Sew-In Fleece cut into TWENTY 8” squares
20 various orange fabric pieces (Each should be around 8” square.)
Coordinating orange thread (I used colors 2135 and 1133 from Aurifil.)
Sewing Machine
Walking foot for your sewing machine
Sharp fabric scissors
Brown felt cut into TEN 1” x 3” strips
3-4 yards cotton rope
Printable Pumpkin Pattern – Download Here

IMG_0677


Colorful Fabric Fall Pumpkin Banner Instructions:

Step 1

Print the pattern shapes onto the StitchnSew Quilt Block Sheets. You’ll need to print a total of 10 sheets. There are 4 different pumpkin shapes so print the entire document twice, then print two more of your favorite shapes for a total of 10.

Step 2

Make each pumpkin shape by making a double-thick quilt sandwich. You’ll layer one orange fabric right side down, TWO pieces of StitchnSew Fleece, and one more fabric square on top, facing up.

IMG_0681

Then pin one of the quilt block sheet patterns on top of each sandwich.

IMG_0683

Stitch directly on all lines with the orange thread.

IMG_0684

Once completed, carefully tear away the pattern sheet, leaving behind just the fabric and thread.

IMG_0685

Now carefully cut about ¼” around the outside of each pumpkin shape.

IMG_0688

Step 3

To add the pumpkin stems, fold each felt strip in half making a loop. Pin the unfolded edge to the back of the pumpkin at each top. Stitch a straight stitch to hold in place.

IMG_0690

Step 4

Layout all your pumpkins to determine your final layout. Now take the cotton rope. Make a loop in one end for hanging.

IMG_0692

String each pumpkin onto the rope, tying a knot directly before and after each stem to hold pumpkin in place. String and knot all pumpkins in this manner leaving about 2″-3” spacing between each pumpkin. Tie a loop in the remaining end. Hang up and enjoy!

IMG_0693

8 Comments on Colorful Fabric Fall Pumpkin Banner

  1. Barbara
    October 19, 2017 at 7:22 am (7 years ago)

    Really cute! Or you could take more time and turn each pumpkin so the fleece is not showing.

    • Erin
      October 19, 2017 at 10:09 am (7 years ago)

      Thanks Barbara! Great idea, If you do that, sew the center lines after flipping. I designed this one so it was a little loose and rustic and I wanted the raw edges to show but using a stitch and flip technique works also!

  2. Barbara
    October 19, 2017 at 7:26 am (7 years ago)

    The down load for the pumpkin pattern does not work 🙁

    • admin
      October 19, 2017 at 8:48 am (7 years ago)

      We’re sorry there was an issue with the site we upload the patterns to but everything should be all set. Julia

      • Louise
        September 1, 2021 at 3:12 pm (3 years ago)

        Can you give imensions of the pumpkin sizes?

        • admin
          September 9, 2021 at 9:02 am (3 years ago)

          Each pumpkin is slightly different but they’re around 7-8 inches in size. Of course, you can enlarge the free pattern or decrease the pattern too!

  3. Marjorie
    October 19, 2017 at 11:08 am (7 years ago)

    This is lovely !!

1Pingbacks & Trackbacks on Colorful Fabric Fall Pumpkin Banner