Hello all, Juliana here with you today to share a Deco Foil Watermelon Wall Art piece. Summer is in full swing here and nothing quite says summer like watermelon! It’s one of my favorite summertime treats and it brings back so many happy memories from my childhood.

Deco Foil Watermelon Wall Art

To begin, download the Free Watermelon Digital Cut File. The link to do this is toward the end of this post. The cut file is designed to allow you to use a mix of different Deco Foil™ colors. Feel free to select your favorite green and red or pink colors to create your watermelon. For this project Therm O Web iCraft® DecoFoil™ in Silver, Black, Lime Green, Green and Wild Cherry were used.

When you’re ready to continue, cut out the various pieces from the Foam Adhesive using an electronic cutting machine. The free digital cut file is available in PNG, SVG, DXF and PDF formats. A good tip for cutting the Foam Adhesive is to place the foam dull side down on the cutting mat. You can also print the file, trace it and cut the design out by hand if you don’t have a cutting machine.

Silhouette Cameo Foam Adhesive Cut Settings

Stamp Setting – set blade at 10. (Silhouette is preprogrammed for 9.)
Speed 1
Thickness 18
Double Cut Checked
Line Segment Overcut On – 0.1mm for start and end

Project Instructions

After you cut the foam, peel off the backing paper. Place a piece of Deco Foil™ onto the piece of foam. Once all of the pieces are covered with foil, layer and arrange them to form the completed watermelon shape.

The finished watermelon shared here is 3.5 x 7 inches and the frame it’s in is 6 x 10 inches. To create your own Deco Foil Watermelon Wall Art, make sure you download the Free Watermelon Digital Cut File.