THE Everyday Captain America Pillow

620170527_162024 20170527_161947

As the daughter of a long line of military heroes this project tugs at a piece of my heart. In honor of all those who have served and the families that they left behind to make keep this country free.

 

Captain American Pillow Supply List:

1 military jacket or shirt
1 undershirt
Scrap gray and green knit fabric, I used old t-shirts
Heat N’Bond™ Soft Stretch Lite, 12-inch
StitchnSew™ Sew-In High Loft Fleece, 19-inch (cut 2 19″ squares)
HeatN’Bond® Fusible Tricot Interfacing, 19-inch
SprayN’Bond® Basting Spray
Aurifil Thread, #2309
Oliso Iron
Sewing Machine
Janome Artistic Edge or another electronic cutter
Fluff for Filling
basic sewing supplies
Everyday Captain America Pillow Instructions:

square.blog-001

Cut 19 inch square from t-shirt, press Heatn’Bond® Fusible Tricot to back side with Oliso Iron.

Press HeatN’Bond® Soft Stretch to the back side of green and gray knit fabric, I cut pieces out of old t-shirts. You only need about 6″ square for the green and 11″ square from gray.

square.blog-002

Using and electronic cutter cut the star circle from green knit. I leave the paper backing on when I put my fabric on the cutting mat, it allows me to use the paper backing as a pacer when pressing.

square.blog-003

Cut rings from gray fabric.

square.blog-004

Use paper backing as a spacer for proper ring placement, pretty handy right!?.

square.blog-005

Add a green star to center and press in place with Oliso iron.

square.blog-006

Stitch around the edges of each piece about 1/16-inch from the edge. If you prefer a cleaner look use HeatnBond® Soft Stretch™ Ultra and skip the stitching.

Cut 19 inch square from the front and the back of Camo Jacket or Military top.

Spray baste with SpraynBond Basting Spray the StitchnSew™ Sew-In High Loft Fleece to the wrong side of T-shirt with Captain America star and wrong side of jacket back

square.blog-007

Trim about 3/4 inch of zipper teeth from both sides of zipper, this will eliminate any broken needles. I will still recommend going slowly over these zipper areas due to the reinforcements on the zips.

square.blog-008

Jacket zipper should be pulled towards the center of the jacket and velcro closures all pressed together. Lay jacket front on T-shirt fleece layer with both right sides facing up. Baste around edges.

With right sides of pillow front and pillow back facing stitch around all 4 sides of pillow leaving an opening at the bottom to turn and fill. Clip excess fabric from the corners then turn pillow right side out. Fill and hand stitched closed.

The zipper will still move freely up and down as you desire to reveal the hero inside.

In honor of the many who have served to and the families who have sacrificed. Thank You.

Happy Sewing,

Jennifer Davey

4 Comments on Everyday Captain America Pillow: Heatn’Bond Soft Stretch

  1. Trish
    June 10, 2017 at 1:16 am (7 years ago)

    Awesomeness Jennifer Great Job-Thank You for sharing

    • Jennifer Davey
      June 13, 2017 at 1:59 pm (7 years ago)

      Thanks Trish!

2Pingbacks & Trackbacks on Everyday Captain America Pillow: Heatn’Bond Soft Stretch