Hi everyone!  It’s Kim Lapacek of Persimon Dreams here!  I’m back with the sixth Mystery ‘Block of the Month’  featuring Deco Foils!

block of the month thermoweb button

I hope you decide to join in the fun!  Each block will be whimsical and fun and a perfect way to use up your scraps.  In the end you’ll have twelve 8-inch blocks that will make an adorable wall hanging OR you can use the blocks to make mini quilts, table runners and pillows!  Feel free to copy the button above and add it to your blog to share with everyone the fun we’re going to have with this quilt along.

Okay – time to reveal the sixth block …(half way there!)

 

“Foiled Egg Block”

Foiled Egg Quilt Block
Supplies:

  • “Foiled Egg” template PDF
  • Sky – 6.5″  x 8.5″ fabric ( I actually chose a fun green to emphasize “Spring” in my block)
  • Ground– 2.5″ x 8.5″ fabric
  • Egg (fun fabric)
  • Egg Stripes
    • Assorted fabric: (1) 3.25” x 1.25”, (1) 2.0” x 4.0”, (1) 1.5” x 4.5”, (1) 1.25” x 4.0”
    • Heat N Bond® Lite:  just under (1) 3.25” x 1.25”, (1) 2.0” x 4.0”, (1) 1.5” x 4.5”, (1) 1.25” x 4.0”
  • Grass Tufts (same as the ground fabric)
    • Fabric: (1) 1.5” x 1.5”, (1) 2.0” x 2.5”, (1) 1.5” x 2.0”
    • Heat N Bond® Lite:  just under (1) 1.5” x 1.5”, (1) 2.0” x 2.5”, (1) 1.5” x 2.0”

 

Directions:

block background

Start by piecing the background of our block this morning.  Take your 6.5″ x 8.5″ piece of sky fabric and sew it to the 2.5″ x 8.5″ piece of ground fabric.

 

Press towards the ground fabric.

tracing templates

Now – take the templates you printed out after you downloaded it for free from my Craftsy pattern page and trace the egg, egg stripes (1 -4 ) and the grass tufts on to the corresponding Heat n Bond® lite pieces.

traced shapes

Trim around the shapes but not too close to any lines.

Press each Heat n Bond® lite shape to the wrong side of the corresponding fabric.  Cut each shape on the lines you drew.

Peel the fusible paper off each fabric piece.  Do this now so you don’t forget to do it before you do your final press.layout shapes

Now it’s time to lay out each piece how we want it before we press it into its final spot.  Once they are where you like them, cover with a pressing sheet and press with a hot iron to secure them to the fabric.

 

decofoil shapes

Trace the shapes shaded in with diagonal lines onto iCraft® Deco Foil™ Hot Melt Adhesive.  Place the shapes onto the corresponding fabric stripes.

decofoil decorations

Take a Pressing Sheet and lay it over the shapes.  Press for 30 seconds.   Let the Deco Foil™ Hot Melt adhesive cool down.  Seriously, let it cool down.

Let it cool down even more.  And once it’s 100% cooled down, peel the paper off.

copper decofoilLay a piece of  DecoFoil over the egg.

Take a Pressing Sheet and lay it over the DecoFoil™.  Press for 30 seconds.  Let it cool down.

IMG_8143

Once it is completely cooled down, peel the decofoil off the block.  Voila!  You now have beautiful “Foiled Egg” block  just in time for easter!

Foiled Egg Quilt Block

The final step is to blanket stitch around each of the pieces you fused down with the Heat N Bond® Lite Fusible.

I hope you’re having fun with these blocks!

six decofoil block of the month blocks

If you’ve followed along so far you should have six blocks!  If not … it’s not too late to join in!  Here are the six blocks -“Wish Upon an Apple Tree“, “Jack-O-Foil“,  “House of Foil” , “Foil Covered Branches”, “Hearts of Foil” and “Foiled Egg” I have shared with you so far.  We’re half way there!


Celebrate Card New Final 2

All this month we’ve celebrated National Craft Month! with you! Along with National Quilting Month!

We’re offering a special sale on all of our Fabric Fuse™ Liquid Adhesive and PeelnStick™ Fabric Fuse products to wrap up our celebration of both National Craft and Quilting Month! Save 25% off all your favorites! Plus you’ll also receive FREE SHIPPING on all orders for $25 after coupon. Use code: FAB25 (in all caps) to save! Click here to shop!

NCM Week 4
 

And don’t miss our amazing giveaway to wrap up National Craft Month!

We’re giving you a chance to win an Oliso Pro Smart Iron..it’s the only iron with feet! Truly!! It offers a patented auto-lift system that automatically lifts and lowers the iron at your touch. It’s incredible! This iron is valued at $170!! Plus yes…there IS a plus we’re giving away one of each color of our Deco Foil™ Transfer Sheets..that’s 26 colors with a value of over $100 along with 4 packs of our Deco Foil™ Hot Melt Adhesive! You’ll be ready to create and create with this outstanding prize! A big thanks goes out to our friends at Oliso!!

Week 4 Giveaway
a Rafflecopter giveaway

2Pingbacks & Trackbacks on “Foiled Egg” DecoFoil Block of the Month