Fall Pumpkin Potholder
Fall Pumpkin Potholder Amy WarnerSoon, we will be enjoying nice cool breezes, falling leaves and everything and anything with pumpkin.  So, why not add this little cutie to your fall table.

Fusible Fleece Fall Pumpkin Patch Potholder

Supplies:

Pumpkin Potholder Amy Warner 4

Several orange fabric scraps
Green fabric scraps for stem
Red Fabric scrap for heart
12 inch square of brown fabric for back
HeatnBond Lite
HeatnBond Fusible Fleece
Pumpkin Pattern
Aurifil thread colors: 50 or 40 wt. – 2865, 2250 & 2310
12 wt. – 1140
Oliso Iron


Fall Pumpkin Potholder Pattern Instructions:

1/4″ seam allowance

Start by cutting the orange fabrics in 1 1/2″ strips.  Sew together. On the top center, sew a 5″ x 6″,  green piece on.

Pumpkin Potholder Amy Warner 5

Trace the pumpkin stem on a piece of HeatnBond Lite.  Iron on to the piece of green fabric.  Cut around the piece.  Save back for a bit. Position the pumpkin template as shown. Iron the fabric stem onto the pumpkin, noting where the pumpkin body is.

Pumpkin Potholder Amy Warner 6

Cut around the pumpkin body and fabric stem.

 

Pumpkin Potholder Amy Warner 7

Pumpkin Potholder Amy Warner 10

Double over your HeatnBond Fusible Fleece.  Cut two fleece pumpkin pieces, 1/4″ smaller than the fabric one. Fuse one to the back of the pumpkin.  Quilt with Aurifil 12 wt. thread.  Use a longer stitch when using this weight. Trace the heart on the HeatnBond lite.  Iron to the wrong side of the red fabric.  Cut out the shape.  Iron heart to the desired location of the pumpkin.

Pumpkin Potholder Amy Warner 8

Applique stitch around the heart and the bottom of the stem.  Place the pumpkin face down onto the right side of the back fabric.

Pumpkin Potholder Amy Warner 9

Cut out pumpkin back and pin together.  Sew around the pumpkin, leaving a 3-inch opening.  Iron on the second piece of your HeatnBond Fusible Fleece to the back of your pumpkin.  Clip corner around the pumpkin.  Turn right side out and topstitch all the way around your pumpkin, securing your opening.

Pumpkin Potholder Amy Warner 1

Give away or enjoy yourself!

Pumpkin Potholder Amy Warner 3

 


One Day Only Flash Sale Heatnbond Soft Stretch

That’s right! Today only save 25% off our NEWEST Heatnbond Soft Stretch Fusible Adhesives! Our HeatnBond Soft Stretch Fusibles comes in Lite and Ultra and are perfect for fabrics with give! Knits, stretch denim, fleece, flannel and more! Available on the roll for hems, 2-yard packages and on the bolt! We know you’re going to love it…here’s some great information on using it with knits!

2 Comments on Fusible Fleece Fall Pumpkin Potholder

  1. mary
    September 14, 2017 at 4:36 pm (1 month ago)

    That is very cute. I think I need a few for my kitchen.

    Reply
  2. Michelle Kuzniar
    September 21, 2017 at 1:14 pm (4 weeks ago)

    Love this, have a bunch of short 1.5″ orange strips left over from easter and last fall. Think I will sew them together in a jelly roll jam fashion. Cutting scrappy strips for the pumpkin shape and adding the sweet heart will make an adorable heat/pot holder. I will be adding isu-lbright to the pot holder to make it heat resistant. My daughter in law and BFF’s will love getting one of these.

    Reply

Leave a Reply to mary Cancel reply