A Little Red Riding Hood House Pillow TutorialWhat you’ll need : :

  • 1 – 3/4 yd cut of Little Red Riding Hood Little Main print in Red
  • 4 – fat quarters prints from the Little Red Riding Hood Collection
  • 1 – Fat Quarter cut of solid fabric for the house pillow front, I used the RBD Basic Gray
  • 1 – Fat Quarter cut of white solid fabric for the windows
  • 1 – piece of batting measuring at least a 15.5″ square
  • 1 – piece of batting measuring at least 10″x16″
  • HeatnBond® lite
  • SpraynBond®
  • rotary cutter/mat/ruler
  • 1 – size 14″ pillow insert
  • house pillow embellishments — buttons, ric rac, ribbon, embroidery floss, etc.

I'm loving these Little Red Riding Hood fabrics! They are so cute!!

Cutting : :

1. Using a cutting mat, ruler, and rotary cutter, cut a piece from the fat
quarter of fabric you choose for the main house pillow front measuring
12.5″x14.5″

2. from the Little Ride Hooding prints, cut 8 –
measuring 3″x4″. I fussy cut some of these to showoff the adorable
design of the main print in this collection

1 Cut Fabrics

Pic 1

Piecing the Pillow Front : : 

3. using a 1/4″ seam allowance, sew the side patchwork pieces together in
the order chosen for both sides of the main house pillow solid fabric,
press seams open

4. lay these patchwork panels, right sides
down, along both long sides of the main house pillow solid fabric, pin
in place, and sew to attach using a 1/4″ seam allowance. Press these
seams open, as well
pic 2

pic 3

Quilting the Pillow Front : : 

5.  Using SpraynBond, baste the pillow front to the piece of batting measuring at least a 15.5″ square

8 Baste to batting

6.begin to add the quilting stitches, first by sewing a 1/4″ on both
sides of the pillow front seams where the main house solid fabric and
patchwork panels were sewn together

9 sew 1.4 inch on each side of seams

7. continue adding the quilting stitches through the center of the pillow
front, keeping a space of about a 1/2″ between each. I simply use my
presser foot as my guide

pic 4

8. use the rotary cutter/ruler/mat set to trim the quilted pillow front to be a 14.5″ square

pic 5

Adding the House Appliques : : 

9.for the house door cut a piece measuring 3″x7″. For the windows cut 3 –
measuring 2.5″x3″ from the white fabric. For the shutters cut 4 –
3″x4″. Have the embellishment supplies ready for adding. I chose ric
rac, a button for the door knob, threads, and floss

14 Supplies for Applique

10. follow HeatnBond® directions and attach to door and window fabrics

14 Prepare applique piecing with interfacing

11. to create the shutter, fold each piece in half with right sides facing and
sew along both side edges using a scant 1’4″ seam. Clip corners, turn
out, and press well. Using a contrasting thread, top stitch around each
shutter

pic 6

12. layout the prepared applique pieces and embellishments onto the house pillow
design. Press with hot iron to adhere the door and window pieces. If
needed, use pins to set any other pieces in place

pic 7

13. using either an applique or zig zag stitch on your sewing machine, stitch
around each of the windows and door to attach them permanently

20 Use your machines applique stitch or zig zag stitch to sew the windows and door in place

21 finished applique stitching

Adding the House Details : :  

14.  it’s time to add those little details — use black thread to add machine
stitched details to the windows, hand sew on the button doorknob, add
hand-stitching with floss, etc. This is the part where you can really
have some fun and make this your own!!

pic 8

Making the House Pillow Roof : :  

15. cut from one fat quarter a piece of fabric measuring 10″x16″ and layer onto a batting piece that same size 

16.  again
add quilting stitches about 1/2″ apart. For this I start in the very
center and work my way out on both sides of that first stitched line,
using my presser foot again as my guide

quilted roof

17. cut roof piece to size by first triming this quilted piece to measure a
9″x15″ rectangle.  Mark a point at the very top center of this piece,
using your rotary cutter/ruler/mat set, set ruler from this point
traveling down to 2″ up from the bottom and trim away corner. Repeat for
the other side, as well

trimmed up roof

18.  cut a piece from the main Little Red Riding Hood fabric the same size as
the quilted roof piece. With right sides together, sew 1/4″ seam along
the pointed sides of the roof and then again with a zig zag stitch

pic 9

19. Trim away the top corner of the roof, turn right side out, and press well  20. Add a top stitch staying very close to the outside edge of this roof piece

pic 10

33 finished pillow front pieces

Adding the House Pillow Roof : :  

21. place quilted roof piece right side facing, along the top of the house pillow front. Pin and sew using a 1/4″ seam allowance   22. to prepare for adding the pillow back fabrics, use pins to make sure the roof sides are out of the way

pic 12

Finishing the House Pillow : :  

23. from the main Little Red Riding Hood fabric, cut 2 — 12 x 14.5″ pieces
for the pillow back fabric. Hem one long side of each piece by folding
edge over 1/4″, press, fold 1/4″ again, press again, and sew along the
inner and outer edge of that fold. Repeat for both pieces. Remember that
these are directional printed fabrics, so make sure you hem the right
side

24. place with rights sides facing onto the house pillow front and pin in place all the way around

pic 13

25. keeping a 1/4″ to a 1/2″ seam, sew all the way around the pillow. Using
a zig zag stitch, sew all the way around again, to reinforance the
pillow sides

39 straight stitch and zig zag around pillow , be careful not to catch the roof sides

26. clip corner, turn pillow out, remove any pins used to pin the roof
sides in, and press. Add two rows of top stitching to the very top of
the house pillow, just below the roof, to give it a little bit of extra
sturdiness

40 add two rows of top top stitching to the pillow to give the house pillow roof a little sturdiness

Fill with your pillow insert and Voila! Your Little Red Riding Hood Quilted House Pillow is finished!!!

Quilted House Pillow

I hope you enjoy this new tutorial!! If you do give this project a go, please feel free to share on the Therm O Web Facebook page, my Facebook page or in my Maureen Cracknell Handmade Flickr group, as well!

  Maureen

a Rafflecopter giveaway

4 Comments on Quilted House Pillow Tutorial

  1. Terri C
    September 27, 2013 at 5:00 pm (11 years ago)

    This is darling ! Will be making this, thanks!

  2. Ginger
    September 27, 2013 at 5:33 pm (11 years ago)

    I love any project by Maureen. She is a fantastic cretor and I absolutely love her quilt as you go projects. this is adorable. thank you for sharing this tutorial.

  3. Kay
    September 28, 2013 at 8:50 am (11 years ago)

    This is a great tutorial, thanks for sharing.

  4. Tambra Vandal
    September 28, 2013 at 10:07 am (11 years ago)

    It’s such a darling pillow